This cable does not have data lines connected through. If your setup requires data then this is not the switch for you.
One side is Standard A and the other is MicroB
ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well. Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2. Just hook up the standard USB end to a 5V 1A USB port power supply or 5V 2A USB port power supply and the Micro B end to a Raspberry Pi and you have a Pi with a switch.
This cable will also work with anything that has a MicroUSB port. This cable does not transfer data - so it's mostly only good for powering and charging devices - but adding an on/off switch to your power supply is a nice addition.
