3.7v Lithium Ion Polymer Battery 150 mAh
Lithium Ion Polymer Battery - 3.7v 150mAh

3.7v Lithium Ion Polymer Battery 150 mAh

Your Price: $5.95
Out of Stock
Part Number:ASD1191

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh.

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 150mA or less. We suggest the Adafruit MicroLipo charger, which has a 100mA default rate.

Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.

Related Items

Accessories

Adafruit Mini Lipo Mini-B USB Lithium Battery Charger
Sale
$6.95  $5.77
Out of Stock
Adafruit MicroLipo USB LiIon/LiPoly Charger v1
Sale
$5.95  $4.94
In Stock
Adafruit Micro Lipo Micro-B USB Lithium Battery Charger
Sale
$6.95  $5.77
In Stock

Recently Viewed Items