USBasp USBISP AVR 10 Pin USB Programmer 3.3V/5V w/Ribbon Cable

This tiny little AVR Programmer is based off of the Thomas Fishl's USBasp design. The programmer uses a firmware-only USB driver via an on-board Atmega8 and no special USB controller is required.

• Windows Drivers and firmware source can be found at http://www.fischl.de/usbasp/

• AVRDUDE supports USBasp since version 5.2.
• BASCOM-AVR supports USBasp since version 1.11.9.6.
• Khazama AVR Programmer is a Windows XP/Vista GUI application for USBasp and avrdude.
• eXtreme Burner - AVR is a Windows GUI Software for USBasp based USB AVR programmers.

• Atmega8/48/88/168/328
• 51 series: AT89S51, AT89S52, AT89S53, AT89S8252
• Attiny2313/4313
• Attiny12/13/13A/15
• Attiny25/45/85
• Attiny24/44/84
• And many many more!!